23948sdkhjf
Innehållet nedan modereras inte i förväg och omfattas därmed inte av webbplatsens utgivningsbevis.

Success Case: Recab developed a camera solution

| Medlemsnyhet | Företag Recab AB

The light conditions are very challenging, from direct sunlight in to the camera to the dark of the middle of the night. The customer needed an easy way to calibrate the system to get the optical center in the lens and camera to line up correctly.

Recab created a solution so the customer continue to be the leading in the world in Military Surveillance.

Background to Recab Solution for case in Military Surveillance
The products is primarily used in border control and long-range surveillance. They are used all over the world so the system must work during all climates and weather conditions. This makes the demands on a camera very high and difficult.

Challenge for the Team players at Recab
⇒ The light conditions are very challenging, from direct sunlight in to the camera to the dark of the middle of the night.
⇒ Customer needed an easy way to calibrate the system to get the optical center in the lens and camera to line up correctly.
⇒ A way to keep the option of long exposure times, that is larger than 1s.
⇒ Easy integration with current set up.

Solution for the customer
By choosing a camera from Imperx with a Sony IMX265 sensor we got better resolution and light sensitivity than the previous camera. With HD-SDI interface it was the same as before, so ease of integration was accomplished. The camera also works in a wide temperature range -30 to +75 degrees witch makes the implementation easier for the customer.

The calibration was fixed by an mechanical change to the camera so that the front plate holding the lens and the rest of the camera was separated and adjustable. This saved the customer a lot of time in the calibration step.

A firmware change allowed for longer exposure times than the sensor normally supports.

Benefits for the customer
⇒ Simple Out of the box integration with customers system.
⇒ Time saved in the calibration step.
⇒ Full HD resolution without loss of frame rate and better light sensitivity gives the operator a better image.

Military Cameras from Imperx 
IMPERX manufactures high performance cameras for industrial, military, medical and municipal applications. Combining extensive, easy-use features with the best CCD and CMOS sensors, IMPERX cameras are available in resolutions from VGA to 47 Megapixels. Designed to perform to the highest standards in harsh environments, the extended operating temperature is -40˚C to +85˚C with a MTBF > 660,000 hours @ 40˚C. IMPERX camera outputs: GigE Vision®, PoE, Camera Link®, CoaXPress and HD-SDI.

We can offert Military Cameras with High Speed, Ruggedized Cameras for Military, Surveillance & Defense Applications within the area:
⇒ Military Jets
⇒ Military Nigh Fighters
⇒ Naval Periscope
⇒ Military Surveillance
⇒ Military Drone & Carrier
⇒ Military Airplane
⇒ Military Tank & Crew

Link to Recab Defence & Avionic selection with more solutions

Welcome to contact your local Team player för more info & the right solution for your business: Info@recab.com

Recab Sweden – Main Office
Västberga Allé 5
SE – 126 30 Hägersten
Phone: + 46 8 683 03 00

Recab Denmark                       
Hassellunden 14
DK – 2765 Smørum
Phone + 45 70 300 310

Recab Norway – Head Office
Midstranda 51
NO – 2321 Hamar

Medlemsnyhet

Företag
Recab AB

VÄSTBERGA ALLÉ 5
126 30 Hägersten
Sverige
Recab AB

Sänd till en kollega

0.094